Toyota will make a full model change of the cross-country SUV “Land Cruiser Prado” and release it as 180 series in August 2023.
table of contents
About the new Land Cruiser Prado 180 series
The old model 150 series will be a (carry over) model with the platform and engine following the predecessor, but this time, of course, it will be called “TNGA (Toyota New Global Architecture)”.Adopts a ladder frame based on the newly developed “GA-F platform”By doing so, it is possible to obtain a wider interior space than the old model. By adopting a newly developed platform, such as realizing high aerodynamic performance, “lower center of gravity” and “increased body rigidity”, it has evolved significantly from the previous model.Realize weight reduction.
The exterior design is of course a keeping concept, but it becomes a more modern design and a more luxurious design. Equipped with triple LED headlights and LED sequential turn lamps (flowing blinkers). The interior has evolved into a modern style compared to the old model, and a liquid crystal panel is used for the meter. The interior uses LED lighting and an electric parking brake (with a hold function). The engine adopts the in-line 4-cylinder 2.5L direct injection engine D-4S “Dynamic Force Engine” installed in Toyota’s new Camry and new RAV4. Better fuel efficiency and torque up than the old model and improved fuel efficiency. The second-generation next-generation “Toyota Safety Sense” is installed as standard on all models.
Equipped with the latest equipment such as a 12.3-inch infotainment display
9-inch display audio is adopted as standard, but as an option12.3-inch wide touchscreen T-Connect SD navigation system“”JBL premium sound system (12 speakers)”.
12.3 inch infotainment display
“12.3-inch wide touchscreen T-Connect SD navigation system“”JBL premium sound system (12 speakers)” is adopted.
Equipped with electric parking brake and auto brake hold function
Electric parking brake (with hold function) is adopted. The electric parking brake and auto brake hold, which are now almost always used in new models, and the function that stops even if you speak the brake when stopping are standard functions that you would want to have if you purchased a new car. I am grateful that you are here.
Fingerprint authentication start switch
to the engine start switchFingerprint authentication start switch” is adopted. The “Land Cruiser Prado” has a very high probability of being stolen because it is a model that is traded at high prices overseas. However, this time, it is possible to prevent theft by equipping the engine start function with fingerprint authentication because it is such a “Land Cruiser Prado”.
The rear second seat is a 4:2:4 split folding type.
Four people can be accommodated by folding only the middle rear seat and loading long objects (skis, snowboards, etc.)is. There are very few car models that can do this seat arrangement, so it is a car model that can be recommended for those who want to use it like this. When the rear seat is folded down, it becomes flat. Furthermore, the luggage compartment has a lever that folds down the rear seats.
Panoramic view monitor equipped as standard on all models
A panoramic view monitor is standard on all models. Length 4,990mm, width 1,980mm, height 1,880mm, wheelbase 2,850mm, almost the same size as its predecessor. Although it is essential, it is appreciated that it is standard equipment on all vehicles.
The latest safety system “Toyota Safety Sense” is equipped as standard on all models.
Toyota Safety Sense has been improved and fine-tuned to improve safety technology (Pedestrians can also be detected at night, leading vehicle start notification function). The name of the conventional “Toyota Safety Sense P/C” will be changed to “Toyota Safety Sense” as a collision avoidance support package. Intelligent clearance sonar is standard equipment. “Safety Support Car S (Wide)” (support car S
Main features of the 2nd generation next-generation Toyota Safety Sense
The 2nd generation next-generation Toyota Safety Sense is installed as standard on all models.In addition to ensuring excellent recognition performance and reliability by using a laser radar and a camera, it is packaged with a collision avoidance support type PCS, LDA, and AHB. Collision avoidance support/damage mitigation performance is ensured even at high speeds.
It supports the latest “collision avoidance support type pre-crash safety”, “detection at intersections”, “low speed acceleration control function” and “emergency steering avoidance support function”.Collision avoidance support type pre-crash safety (PCS) with pedestrian detection functionA millimeter-wave radar and camera are used to detect vehicles and pedestrians in front, and alerts, brake assist, and automatic braking are used to help avoid collisions and reduce damage. Automatic braking works on pedestrians in the speed range of 10 to 80 km/h. For example, if the speed difference with the pedestrian is 30 km/h, the vehicle slows down by approximately 30 km/h to help avoid collisions. . For vehicles, it operates in a wide range of speeds from 10km/h to maximum speed. In addition, “low speed acceleration suppression function”, “oncoming straight vehicle and pedestrian detection when turning right at intersection”, and “emergency steering avoidance support function” have been added.
- At low speeds, the low-speed acceleration suppression function detects pedestrians, bicyclists, and vehicles in front of the vehicle and suppresses acceleration.
- It can also detect oncoming vehicles when turning right at an intersection, and pedestrians crossing the opposite direction when turning right or left.
- An emergency steering avoidance support function that assists steering when the driver avoids steering in an emergency.
Road Sign Assist (RSA)In addition to expanding the detection target, it also reads major traffic signs such as “speed limit”, “stop”, “no entry” and “no stray” on the side of the road and displays them on the instrument panel.
Lane Departure Alert (LDA)A camera recognizes the white and yellow lines in the driving lane, and if it detects the possibility of lane departure, it warns the driver with a buzzer and display to help avoid collisions due to lane departure.
Automatic high beam (AHB)A camera detects the headlights of an oncoming vehicle or the taillights of a preceding vehicle, and automatically switches between high beam and low beam to reduce dazzle for drivers of other vehicles and help secure forward visibility at night.
radar cruise controlThe radar cruise control system uses a millimeter-wave radar to detect the distance between the vehicle and the vehicle in front, and adjusts the vehicle speed to match the speed of the vehicle ahead, allowing the vehicle to follow the vehicle while maintaining a certain distance. Millimeter-wave radar and a camera detect when the vehicle ahead changes lanes, enabling smoother acceleration and deceleration control. Aiming for the ultimate goal of a mobile society, which is to achieve zero traffic casualties, Toyota researches and develops various safety equipment and systems based on the Integrated Safety Concept, aiming to develop safer vehicles and technologies. While striving forward, we are strengthening a wide range of initiatives for traffic safety through “participation in improving the traffic environment” and “traffic safety awareness activities for people.”
Lane Tracing Assist (LTA)When driving on a highway or highway, if the Lane Tracing Assist[LTA]switch is turned ON while the radar cruise control is in operation, the steering operation assistance necessary for keeping the lane is performed. Added curve speed control function. System for dealing with driver abnormalities Added a function that detects driver abnormalities and contributes to lifesaving.
Curve speed control functionWhen the radar cruise control is activated, the speed control starts when the steering wheel is turned.
Preceding vehicle start notification functionIf the vehicle stops following the vehicle ahead due to waiting at a traffic light or in a traffic jam, and if the vehicle is left without noticing that the vehicle ahead has started, a buzzer and display will notify the driver.
Toyota 2nd generation version Toyota Safety Sense introduced from 2018 Comparison Changes
Intelligent clearance sonar (standard on all models)A system that mitigates collisions that occur when the accelerator is pressed incorrectly or too far, helping to reduce damage. A function to reduce contact with stationary objects has been added to the “clearance sonar,” which notifies the driver of approaching stationary objects by displaying and buzzing when driving in a garage. The sonar detects glass such as convenience stores firmly. If a stationary object is detected in the direction of travel while driving at low speeds (15km/h or less), the hybrid system output is suppressed, and if the distance decreases, the brakes are automatically applied.
Blind Spot Monitor (BSM) Radar detects vehicles running in the next lane. When the vehicle enters the blind spot area, the LED indicator mounted on the door mirror lights up.
Rear cross traffic auto brakeDetects blind spots when reversing and calls attention. If there is a risk of collision, the system automatically applies brake control to help reduce damage from collisions with approaching vehicles.
Emergency brake signal (hazard lamp flashing type)Hazard lamps automatically flash when the brakes are applied suddenly.
digital inner mirrorThe image of the camera attached to the rear of the vehicle is displayed on the rearview mirror. It also has a recording function.
Remote start (app)A new optional service that allows you to start the engine and air conditioner from the MyTOYOTA app.
Intelligent Parking Assist 2(with trapping alarm function + back guide monitor function + voice guidance function)
Toyota Connected (IoT) T-Connect DCM package standard on all models
Since 2002, Toyota has put the in-vehicle communication device DCM into practical use. In 2011, Toyota Smart Center and cloud were built. Equipped with the system installed in the new Prius PHV. Equipped with T-Connect SD navigation system and DCMFree car monitoring for 3 years, map-on-demand, agent and operator services available.
It adopts display audio with a 12.3-inch touch screen, and adopts “Apple CarPlay” and “Android Auto”. Equipped with DCM in-vehicle communication device as standard. An in-vehicle navigation function, “T-Connect Navigation Kit” is also available as an option. In addition, a dedicated communication device DCM is installed as standard on all vehicles, and T-Connect service is provided free of charge for three years.
Cooperation is possible by connecting a smartphone with a USB cable(“Apple CarPlay” and “Android Auto” are standard compatible options, SDL (Smart Device Link) “TC smartphone navigation”, “LINE car navigation”, “LINE MUSIC”, etc.), and the map application and music that you use every day can be displayed on the display. Can be operated and used.Application for TV (Full Seg) option price 33,000 yen[tax included]requiredbecomes.
There is no “Naviless” optionOn the contrary, because the shape is differentThere is not even a “2DIN size” to attach an external navigation system.in shortCurrently, it is not possible to install an external navigation system.
Toyota Display Audio Compatible with Apple CarPlay and Android Auto
New Land Cruiser 180 equipment comparison
|system equipment||land cruiser
|Collision avoidance support type
with control function)
White line/yellow line detection
White line/yellow line detection
Road edge detection
high beam system
(With all vehicle speed tracking function)
|Curve speed control function||–||◯|
|road sign assist||–||◯|
Emergency response system
|Preceding vehicle start notification||–||◯|
|rear cross traffic
|Comfortable thermal sheet +
|electric parking brake
|driver seat auto
|electric tilt &
|In-vehicle communication device (DCM)||◯||◯|
New Land Cruiser Prado 180 Series Specs
|spec||New Land Cruiser Prado|
|engine||Inline 4 cylinder 2.5L
direct injection engine
|2.8L inline 4 clean
|Maximum output||151kW (205ps)/
|Maximum torque||250Nm (25.3kgm)/
|WLTC mode fuel consumption||11.5km/L||12.0km/L|
|Boarding capacity||5 to 7 people|
|expected price||From 4,170,000 yen
4.95 million yen
|4,530,000 yen ~
6.04 million yen
About the old Land Cruiser Prado
The 4th generation Land Cruiser Prado 150 series was remodeled in 2009 for the first time in about 7 years from the 120 series. June 17, 2015 Partially improved.
While the V6 4.0 L car that had been set up in the past was discontinued for the Japanese domestic market, the diesel car for the domestic market was revived for the first time in about 6 years and 11 months since the discontinuation in July 2007. 2.8L in-line 4-cylinder clean diesel direct-injection turbo engine Combines next-generation high-insulation diesel combustion and a compact, high-efficiency turbocharger. JC08 mode fuel consumption is 11.8km/L.
On August 29, 2016, the 70th anniversary special model “TX”L Package G-FRONTIER” was released at the Toyota store.Toyota made a minor change to the new Land Cruiser Prado 150 series and released it on September 12, 2017.Price: 3,538,080 yen to 5,363,280 yen. Press days September 12-13, 2017, public days September 16-24, 2017 The world premiere will be at the Frankfurt Motor Show 2017. The Toyota press conference will be held on September 12th at 8:50 (local time).
Toyota made some improvements to the new Land Cruiser Prado 150 series minor change model and released it on June 25, 2018. Price: 3,538,080 yen to 5,363,280 yen.
About Land Cruiser Prado Spec
|spec||land cruiser prado|
|engine||2.7L straight 4
|2.8L inline 4 clean
|JC08 mode fuel consumption||9.0km/L||11.8km/L|
|Boarding capacity||5 to 7 people|
|price||From 3,450,000 yen
4.05 million yen
|4,060,000 yen ~
5.23 million yen
We will inform you as soon as we have new information.
toyota round cruiser prado